Anatolia Stone 
TÜRKÇE

TECHNICAL INFORMATIONS

 

Fiberglass Panel's Technical Informations


Proporties;

  • First class raw materials such as stone dust, glass fiber, polyester are used in the production of fiberglass panels.
  • The most important reason why panels can’t distinguished between real stone and brick is to copying from natural stones using silicon molds.
  • They do not take up much space. It has a thickness between 3mm and 5mm.
  • A square meters average weight is 3-4 kg.
  • It can be easily cut with jigsaw.
  • It carries realistic stone texture and appearance over the walls and ceiling surfaces effortlessly.
  • Panels made of fiberglass is resistant to heat, not flameproof
  • It has no negative effects such as cracking and breaking. It's durable.
  • It is not affected by moisture and water. It can be safely chosen in wet areas.
  • It can be safely applied on outdoor surfaces as well as on the inside.
  • It is not affected by cold, from the wind, sunlight, water.
  • It can be practiced by giving different forms with its flexible structure.
  • The surface may be pierced with screws. You can safely hang items such as tables, televisions, clocks on the surface.
  • Provides you with the color work to reach the concept you are targeting.
  • It does not cause any health problems because of its anti-bacterial properties.
  • It can be easily cleaned using water.
  • Panels have C2 non-flammability certificate.
  • Guaranteed for 10 years

    Advantages;
  • Practice steps are pretty easy. It does not take long. Installation is quick.
  • It is easily demounted in decoration changes.
  • It does not overload the surfaces.
  • Durable structure prevents deformation. Used for a long time without wear.
  • It has the most natural appearance due to the production techniques we have developed.
  • Economic. With low budgets, you can catch big changes.
  • Easy installation does not remove construction rubble.
  • It gives a monolithic image owing to special putty and retouch painting which we give for the heads and joints.
  • It can be removed and installed on other surfaces during the decoration change. The lifetime is long.
  • Easy to assemble to any flat surface
  • The surface to which it is applied does not deform. It only creates screw holes.
  • You can install with screw to wood,precast concrete panel, sheetrock, iron profile, wood profile and polystyrene sheet.

    Installation;

    Calculate the dimensions of the surface on which the panels will be applied in square meters. Measure the surface from right to left and from top to bottom and multiply the results. So you will determine how much panels you need. Calculate the surface suitability of the panels you bought from Anatolia Stone. Cut the excess parts of panels with a jigsaw or a diamond saw. Mount the panels using an average of 20 screws. Screw in the joint lines. Add 2% hardener into the polyester mastic sent by Anatolian Stone and mix them. And, prepare the mastic paste. Coat the mastic paste you prepare for the screws and joints with the aid of a spatula. With the help of brush and spatula, do form edits to keep track of the texture. After the mastic paste is dry, coat with a thin-tipped brush to provide color continuity, by using Anatolia Stone paints.

  • TECHNICAL INFORMATIONS

     

    Cultured Stone-Brick Techical Informations


    Proporties;

  • Decorative stone and brick produced with special technique using lightweight aggregate, high strength, pure Portland cement (PO 52.5) inorganic iron oxide pigments.
  • Obtained by copying natural stones. It has realistic and natural appearance.
  • It is easily applied to all surfaces that are finished with rough construction.
  • Does not cause any negative effects such as cracking or breaking. It's durable.
  • It is not affected by moisture and water. It can be safely applied in wet areas.
  • It is not affected by cold, wind, sun(uv).
  • Provides you with the color work to reach the concept you are targeting.
  • It does not cause any health problems because of its antibacterial properties.
  • Easily cleanable.

    Advantages;
  • There are rich colour options for each concept.
  • Practice is easy. It does not take much time.
  • Minimum load on the surface to be applied. It has a light structure.
  • It does not easily deform due to its high quality inner structure. Maintain the integrity of the surface for many years.
  • Bims sand (pumice) in the structure helps to heat and sound insulation.
  • It does not cause loss of space in your building because of the flat rear surface of the product.

    Installation;

    Calculate the dimensions of the surface on which the stones will be applied in square meters. Measure the surface from right to left and from top to bottom and multiply the results. So you will determine how much stone you need. Do not forget that you can apply decorative stone-brick from Anatolia Stone to every flat surface (brick, concrete, plastered wall ...). First, if the surface is painted and smooth, it is necessary to notch the surface with a hammer and similar tools. Before plastering our products on wood, plaster, gypsum board, metal, polystyrene sheet surfaces, plaster with adhesive on plaster mesh and concrete undercoat. Prepare to adhisive material after preparing the installation surface. You can apply to Anatolia Stone products to surface with ceramic adhesive or tile adhesive. For getting optimal consistency, add water until it becomes dark creamy. Apply the prepared mortar to the surface with a thickness of 1-1.5 cm. Take care not to exceed a square meter of the mortar. Place the Anatolia Stone products which we send with package that colour dispersion is made, and slightly hit them by using a plastic hammer to ensure that the stones are fully placed. After you put the stones, check them with the water gage. Do not forget to wet the wall in hot weather before you stick the stones. Repeat the same process for the back surfaces of Anatolia Stone products.